Best GPUs for AI, LLMs and Deep Learning in 2026

VRAM decides whether a model runs at all: if weights and KV cache do not fit in GPU memory, extra compute does not help. By that measure and by speed, the best GPU for AI in 2026 is the NVIDIA RTX PRO 6000 Blackwell, with 96 GB of GDDR7 ECC, 1.79 TB/s of bandwidth and 503.8 dense BF16 TFLOPS, enough for a 70B large language model at 8-bit on a single GPU. You can rent it as a dedicated GPU server instead of paying $16,999 at retail. Among consumer cards, the NVIDIA GeForce RTX 5090 with 32 GB is the fastest for models that fit.

Quick Answer: Best GPU for AI in 2026 by Use Case

The RTX PRO 6000 Blackwell is the top pick because 96 GB runs 70B models on one card; the RTX 5090 leads consumer cards. The table shows the best option for each use case.

GPU Best for VRAM Memory bandwidth BF16 TFLOPS (dense) Lowest precision (FP8/FP4) TDP
1. RTX PRO 6000 Blackwell Overall, 70B on one card 96 GB 1.79 TB/s 503.8 FP4 600 W
2. RTX 5090 Best consumer card 32 GB 1.79 TB/s 209.5 FP4 575 W
3. RTX 4090 FP8 inference 24 GB 1.01 TB/s 165.2 FP8 450 W
4. RTX 3090 Best value 24 GB 24 GB 0.94 TB/s 71.2 BF16 (no FP8) 350 W
5. RTX 5070 Ti Best budget pick 16 GB 0.90 TB/s 87.9 FP4 300 W
6. RTX 5060 Ti 16 GB Cheapest 16 GB, learning 16 GB 0.45 TB/s ≈47.4 FP4 180 W
7. Radeon AI PRO R9700 32 GB on ROCm 32 GB 0.64 TB/s ≈191 FP8 300 W
8. Arc Pro B70 Cheapest 32 GB 32 GB 0.61 TB/s ≈183 INT8 230 W
9. DGX Spark 100B+ models 128 GB unified 0.27 TB/s ≈125 FP4 140 W (chip)
10. Ryzen AI Max+ 395 Cheapest 128 GB Up to 128 GB unified 0.26 TB/s ≈60 INT8 55 W (45 to 120 W)

≈ marks an estimate where the vendor gives no dense BF16 figure: it follows from the published FP16, INT8 or sparse FP4 rate. For enterprise AI, see the data center section.

How we ranked these GPUs. The LikeVPS team compiled this ranking; we rent servers with the GeForce RTX 2080 Ti, GeForce RTX 5070 Ti and RTX PRO 6000 Blackwell.

Which GPU for AI fits your model at 4-bit: RTX 5070 Ti 16 GB up to 13B, RTX 5090 32 GB up to 32B, RTX PRO 6000 96 GB up to 120B, B200/B300 8-GPU server for 200B+

Cards are ranked by what they let you run and how fast, using these criteria:

  • VRAM: the largest model that loads.
  • Memory bandwidth: sets tokens per second.
  • Dense BF16 TFLOPS: drives training speed.
  • FP8/FP4 support: fits bigger models.
  • Multi-GPU scaling: NVLink or multi-card support.
  • Software: CUDA, ROCm or Intel support in PyTorch, vLLM, llama.cpp and Ollama.
  • Price per GB of VRAM.

Cards with full CUDA support rank above AMD and Intel cards, and unified-memory systems rank last because of their bandwidth. We ran no tests. Speed figures come from the llama.cpp CUDA and ROCm scoreboards (Llama 2 7B, Q4_0, 128-token generation) and Artificial Analysis (4-bit models); TFLOPS come from vendor whitepapers and spec pages; VRAM estimates follow the formula below.

How Much VRAM Do You Need for AI?

A 7B model needs about 4.2 GB at 4-bit (est.) and a 70B model about 42 GB (est.), so 16 GB covers small models and 70B needs 96 GB or two 24 GB cards.

VRAM for Running LLMs: From 8B to 120B Models

How much VRAM for LLM inference you need depends on parameters and quantization:

Model FP16 8-bit 4-bit Smallest GPU from this list that fits at 4-bit
7B 16.8 GB est. 8.4 GB est. 4.2 GB est. RTX 5060 Ti 16 GB
13B 31.2 GB est. 15.6 GB est. 7.8 GB est. RTX 5060 Ti 16 GB
32B 76.8 GB est. 38.4 GB est. 19.2 GB est. RTX 3090 (24 GB)
70B 168 GB est. 84 GB est. 42 GB est. RTX PRO 6000 Blackwell (96 GB)

Formula: weights (GB) ≈ parameters (B) × bytes per parameter (FP16 = 2, 8-bit = 1, 4-bit = 0.5), plus 20% for KV cache and runtime at 8K context.

VRAM of 10 GPUs for AI compared with 13B, 32B, 70B and 120B model sizes at 4-bit

OpenAI’s gpt-oss-120b (117B parameters) needs 70.2 GB at 4-bit (est.) and fits the RTX PRO 6000 Blackwell or DGX Spark. Longer context and batch size grow the KV cache. Mixture-of-experts models load every expert but read few per token: in Artificial Analysis tests, Qwen3.6-35B-A3B ran 2.5 to 3.3× faster than dense Qwen3.8-27B.

VRAM for Training and Fine-Tuning: Full vs LoRA vs QLoRA

Full fine-tuning with mixed precision and Adam takes about 16 bytes per parameter before activations, per Microsoft’s ZeRO paper, so a 7B model needs about 112 GB (est.). LoRA trains small adapters; its authors report 3× less memory on GPT-3 175B. QLoRA fine-tuned a 65B model on one 48 GB GPU, which makes a 96 GB card the best GPU for fine tuning LLM models up to 70B.

Other GPU Specs That Matter for AI

What makes a GPU good for AI after VRAM is bandwidth, tensor core precision and software support, which set how fast AI models run.

How to choose the right GPU for your AI project:

  1. Model size and precision set the VRAM.
  2. Context length adds KV cache.
  3. AI inference needs bandwidth; model training needs BF16 TFLOPS.
  4. Check your AI frameworks against CUDA, ROCm or Intel’s stack.
  5. Plan power and cooling: 55 W to 600 W here.
  6. Only the RTX 3090 among consumer cards here has NVLink.
  7. Decide whether to buy a card or rent a dedicated server.

Memory Bandwidth: What Sets Token Speed

Each generated token reads the weights from VRAM, so memory bandwidth sets token speed. On the llama.cpp scoreboard, the RTX 5090 (1.79 TB/s) generates 300.4 tokens per second, the RTX PRO 6000 Blackwell (1.79 TB/s) 281.1 and the RTX 3090 (0.94 TB/s) 161.9. Artificial Analysis measured the RTX 5090 more than 3.5× faster than DGX Spark and Ryzen AI Halo on models that fit in 32 GB.

LLM generation speed in tokens per second on llama.cpp, Llama 2 7B Q4_0: RTX 5090 300.4, RTX PRO 6000 281.1, RTX 4090 189.0, RTX 5070 Ti 182.4, RTX 3090 161.9, Radeon AI PRO R9700 98.0, Ryzen AI Max+ 395 49.9

Tensor Cores and Precision: FP16, FP8 and FP4

Each precision step halves memory per parameter: Blackwell GPUs run FP4, Ada and Hopper GPUs stop at FP8, and the RTX 3090 has no FP8. Vendors often quote sparse “AI TOPS”, double the dense figure; in dense BF16, the RTX PRO 6000 Blackwell lists 503.8 TFLOPS, 2.4× the RTX 5090.

Software Support: NVIDIA CUDA vs AMD ROCm vs Intel

CUDA remains the default: PyTorch, vLLM, llama.cpp and Ollama all run on NVIDIA GPUs. ROCm 10.1 officially supports Radeon AI PRO R9000, RX 9000/7000 and Ryzen AI Max on Linux and Windows 11. Intel’s Arc Pro cards run LLMs through vLLM on Linux.

Best Overall: RTX PRO 6000 Blackwell (96 GB)

96 GB on a single card runs 70B models and gpt-oss-120b without splitting them across GPUs.

#1. RTX PRO 6000 Blackwell

The NVIDIA RTX PRO 6000 Blackwell ranks first: it is the only desktop card here that holds 70B at 8-bit (84 GB est.), it leads the list with 503.8 dense BF16 TFLOPS, and it matches the RTX 5090 on bandwidth at 1.79 TB/s. On the llama.cpp scoreboard it generates 281.1 tokens per second.

Best for: 70B models, gpt-oss-120b and QLoRA fine-tuning on one card.

Key specs:

  • Architecture: Blackwell
  • VRAM: 96 GB GDDR7 ECC
  • Bandwidth: 1.79 TB/s
  • BF16 Tensor (dense): 503.8 TFLOPS (Max-Q: 438.9)
  • Lowest precision: FP4
  • TDP: 600 W (Max-Q: 300 W)
  • Form factor / multi-GPU: dual-slot; Multi-Instance GPU, 4 instances
  • Software stack: CUDA

Pros:

  • 96 GB on one card
  • 503.8 BF16 TFLOPS, the highest here
  • ECC memory

Cons:

  • Highest card price here ($167 per GB); NVIDIA store out of stock

Price: $16,000 vendor store (out of stock); $16,999 retail.

Where to run it: LikeVPS GEX131-1: dedicated bare-metal server with RTX PRO 6000 Blackwell (96 GB), $3,230/month billed annually or $3,800 month-to-month, Finland or Germany, ready in 1 to 4 hours. Servers run in Finland and Germany.

Not for: workloads that never exceed 32 GB.

Best Consumer GPUs for AI and Local LLMs

Among consumer cards, the RTX 5090 leads for training and inference, followed by 24 GB and 16 GB cards.

RTX 5090: Is It the Best Consumer GPU for AI?

#2. GeForce RTX 5090

Yes, if the model fits in 32 GB: the NVIDIA GeForce RTX 5090 pairs 1.79 TB/s with FP4 tensor cores and leads the llama.cpp scoreboard at 300.4 tokens per second. It ranks second because 32 GB is a third of the RTX PRO 6000 Blackwell’s 96 GB: a 70B model at 4-bit (42 GB est.) does not fit.

Best for: local LLMs up to 32B, coding agents and generative AI for images and video.

Key specs:

  • Architecture: Blackwell
  • VRAM: 32 GB GDDR7
  • Bandwidth: 1.79 TB/s
  • BF16 Tensor (dense): 209.5 TFLOPS
  • Lowest precision: FP4
  • TDP: 575 W
  • Form factor / multi-GPU: 2-slot; no NVLink
  • Software stack: CUDA

Pros:

  • Highest consumer bandwidth in this list
  • FP4 tensor cores
  • Full CUDA support in every major framework

Cons:

  • Retail price 2.4× launch; NVIDIA specifies a 1000 W power supply

Price: $1,999 launch; $4,799.99 retail (out of stock).

Where to run it: retail desktop card.

Not for: 70B models on one card.

RTX 4090 and RTX 3090: The 24 GB Option

24 GB runs 32B models at 4-bit (19.2 GB est.).

#3. GeForce RTX 4090

The NVIDIA GeForce RTX 4090 generates 189.0 tokens per second on the llama.cpp scoreboard, 17% faster than the RTX 3090, and adds FP8. It ranks below the RTX 5090 on VRAM.

Best for: FP8 inference of 32B models.

Key specs:

  • Architecture: Ada Lovelace
  • VRAM: 24 GB GDDR6X
  • Bandwidth: 1.01 TB/s
  • BF16 Tensor (dense): 165.2 TFLOPS
  • Lowest precision: FP8
  • TDP: 450 W
  • Form factor / multi-GPU: 3-slot; no NVLink
  • Software stack: CUDA

Pros:

  • 1.01 TB/s
  • FP8 tensor cores
  • Mature CUDA support

Cons:

  • Third-party listings only

Price: $1,599 launch; $4,395 retail (third-party).

Where to run it: retail desktop card.

Not for: buyers who can get an RTX 5090.

#4. GeForce RTX 3090

The NVIDIA GeForce RTX 3090 is the only consumer card here with NVLink; a pair gives 48 GB, enough for 70B at 4-bit (42 GB est.). It ranks fourth because it lacks FP8 and sells mostly used.

Best for: two-card 48 GB builds.

Key specs:

  • Architecture: Ampere
  • VRAM: 24 GB GDDR6X
  • Bandwidth: 0.94 TB/s
  • BF16 Tensor (dense): 71.2 TFLOPS
  • Lowest precision: BF16 (no FP8)
  • TDP: 350 W
  • Form factor / multi-GPU: 3-slot; 2-way NVLink
  • Software stack: CUDA

Pros:

  • $76 per GB used
  • NVLink
  • Full CUDA support

Cons:

  • No FP8; used units lack warranty

Price: $1,499 launch; $1,829 retail (used).

Where to run it: used retail desktop card.

Not for: FP8 or FP4 workloads.

Best Budget GPU for AI: 16 GB Cards

16 GB is the practical minimum: it runs 13B models at 8-bit (15.6 GB est.). Of the two 16 GB cards, the RTX 5070 Ti is the pick.

#5. GeForce RTX 5070 Ti

The NVIDIA GeForce RTX 5070 Ti has twice the bandwidth of the RTX 5060 Ti (0.90 vs 0.45 TB/s) and reaches 182.4 tokens per second, close to the RTX 4090, which makes it the best 16 GB card here. It ranks below the 24 GB cards on memory.

Best for: fast 7B to 13B inference.

Key specs:

  • Architecture: Blackwell
  • VRAM: 16 GB GDDR7
  • Bandwidth: 0.90 TB/s
  • BF16 Tensor (dense): 87.9 TFLOPS
  • Lowest precision: FP4
  • TDP: 300 W
  • Form factor / multi-GPU: varies by maker; no NVLink
  • Software stack: CUDA

Pros:

  • FP4 tensor cores
  • 2× RTX 5060 Ti bandwidth
  • 300 W

Cons:

  • 16 GB caps models at 13B in 8-bit

Price: $749 launch; $1,179.99 retail.

Where to run it: LikeVPS WG-2: dedicated bare-metal server with GeForce RTX 5070 Ti (16 GB), $680/month billed annually or $800 month-to-month, Netherlands, ready in 1 to 4 hours. See GPU servers.

Not for: 32B and larger models.

#6. GeForce RTX 5060 Ti 16 GB

The NVIDIA GeForce RTX 5060 Ti 16 GB is the lowest-cost new card here with 16 GB and FP4, at a $429 launch price. It ranks sixth because 0.45 TB/s is the lowest bandwidth among discrete cards here.

Best for: learning and 7B to 13B models at 4-bit.

Key specs:

  • Architecture: Blackwell
  • VRAM: 16 GB GDDR7
  • Bandwidth: 0.45 TB/s
  • BF16 Tensor (dense): ≈47.4 TFLOPS
  • Lowest precision: FP4
  • TDP: 180 W
  • Form factor / multi-GPU: varies by maker; no NVLink
  • Software stack: CUDA

Pros:

  • Lowest 16 GB launch price
  • FP4 tensor cores
  • 180 W

Cons:

  • Lowest discrete-card bandwidth

Price: $429 launch; $789.99 retail.

Where to run it: retail desktop card.

Not for: training or models above 13B.

AMD, Intel and Unified-Memory Alternatives

Without CUDA or with less bandwidth, these options trade speed for a lower price or more memory.

32 GB Alternatives from AMD and Intel: Radeon AI PRO R9700 and Arc Pro B70

Both offer 32 GB for less than an RTX 5090, without CUDA.

#7. Radeon AI PRO R9700

The AMD Radeon AI PRO R9700 brings 32 GB and FP8 at a $1,299 launch price, with official ROCm support. It generates 98.0 tokens per second on the llama.cpp ROCm scoreboard, about a third of the RTX 5090, which sets its rank.

Best for: 32B models at 4-bit on ROCm.

Key specs:

  • Architecture: RDNA 4
  • VRAM: 32 GB GDDR6
  • Bandwidth: 0.64 TB/s
  • BF16 Tensor (dense): ≈191 TFLOPS
  • Lowest precision: FP8
  • TDP: 300 W
  • Form factor / multi-GPU: dual-slot; multi-GPU over PCIe
  • Software stack: ROCm

Pros:

  • $53 per GB
  • FP8 support
  • ROCm on Windows 11 and Linux

Cons:

  • No CUDA

Price: $1,299 launch; $1,699.99 retail.

Where to run it: retail desktop card.

Not for: CUDA-only tools.

#8. Arc Pro B70

The Intel Arc Pro B70 is the cheapest new 32 GB card here at $1,299.99, or $41 per GB. In Intel’s MLPerf Inference v6.1 submission, four B70 cards served gpt-oss-120B at 1,956 tokens per second. It ranks behind the R9700 on compute (≈183 vs ≈191 BF16 TFLOPS) and framework support.

Best for: low-cost 32 GB inference on Linux.

Key specs:

  • Architecture: Xe2
  • VRAM: 32 GB GDDR6
  • Bandwidth: 0.61 TB/s
  • BF16 Tensor (dense): ≈183 TFLOPS
  • Lowest precision: INT8
  • TDP: 230 W
  • Form factor / multi-GPU: 2-slot; multi-GPU on Linux
  • Software stack: Intel XPU, vLLM

Pros:

  • Lowest price per GB of new cards
  • 230 W
  • Multi-GPU on Linux

Cons:

  • Narrowest framework support

Price: $1,299.99 retail, sold through board partners.

Where to run it: retail desktop card.

Not for: CUDA workflows.

DGX Spark, RTX Spark and Ryzen AI Max+: Up to 128 GB of Unified Memory

These systems fit 100B+ models in 128 GB but run at 0.26 to 0.30 TB/s. NVIDIA RTX Spark, a Windows-on-Arm chip with up to 128 GB, is still in preorder, so it is not ranked.

#9. DGX Spark

The NVIDIA DGX Spark is a desktop system rated for models up to 200B parameters; the official llama.cpp benchmark shows 58.72 tokens per second on gpt-oss-120B. It ranks ninth because 0.27 TB/s limits speed.

Best for: 70B to 120B models on a desk.

Key specs:

  • Architecture: Grace Blackwell (GB10)
  • VRAM: 128 GB LPDDR5x unified
  • Bandwidth: 0.27 TB/s
  • BF16 Tensor (dense): ≈125 TFLOPS
  • Lowest precision: FP4
  • TDP: 140 W (GB10 chip)
  • Form factor / multi-GPU: desktop system; up to 4 units linked
  • Software stack: CUDA, DGX OS

Pros:

  • 128 GB in one box
  • Full CUDA stack
  • 240 W power supply

Cons:

  • 0.27 TB/s at $6,950

Price: $6,950 vendor store; $7,999 retail.

Where to run it: desktop system (retail).

Not for: fast inference under 32 GB.

#10. Ryzen AI Max+ 395

The AMD Ryzen AI Max+ 395 is a processor with Radeon 8060S graphics that gives the GPU up to 96 GB of its 128 GB. It ranks last on speed: 49.9 tokens per second on the llama.cpp ROCm scoreboard.

Best for: the cheapest 128 GB system for MoE models.

Key specs:

  • Architecture: RDNA 3.5 (Radeon 8060S)
  • VRAM: up to 128 GB LPDDR5x unified (96 GB as VRAM)
  • Bandwidth: 0.26 TB/s
  • BF16 Tensor (dense): ≈60 TFLOPS
  • Lowest precision: INT8
  • TDP: 55 W (configurable 45 to 120 W)
  • Form factor / multi-GPU: mini PCs and laptops
  • Software stack: ROCm

Pros:

  • $30 per GB, lowest here
  • ROCm on Linux and Windows 11
  • Complete system

Cons:

  • Lowest bandwidth here

Price: $3,799 retail for a 128 GB mini PC.

Where to run it: desktop or laptop system (retail).

Not for: training or fast token generation.

Data Center GPUs for AI: H100 vs H200 vs B200 vs B300

For large-scale AI and other demanding AI workloads, the NVIDIA B300 leads with 288 GB of HBM3e per GPU, and the NVIDIA H100 Tensor Core GPU remains the reference: Stanford’s AI Index measures global AI compute in H100-equivalents. All four are server-only, often rented as a cloud GPU in 8-GPU systems.

GPU Architecture Memory Bandwidth BF16 TFLOPS (dense) Lowest precision Power NVLink
H100 SXM Hopper 80 GB HBM3 3.35 TB/s ≈989 FP8 Up to 700 W 900 GB/s
H200 SXM Hopper 141 GB HBM3e 4.80 TB/s ≈989 FP8 Up to 700 W 900 GB/s
B200 Blackwell 180 GB HBM3e 8.00 TB/s ≈2,250 FP4 ≈1,000 W 1.8 TB/s
B300 Blackwell Ultra 288 GB HBM3e 8.00 TB/s ≈2,250 FP4 ≈1,100 W 1.8 TB/s

≈ marks per-GPU values derived from NVIDIA’s sparse and 8-GPU system figures.

The NVIDIA H200 adds 61 GB and 1.45 TB/s to the H100; GPUs like the NVIDIA A100 lack FP8. In MLPerf Inference v6.1, the best DeepSeek-R1 result per accelerator was 5.7× a year earlier. NVIDIA’s next GPU, Rubin, pairs 288 GB of HBM4 with 22 TB/s; production shipments are planned for this fall.

Best GPU for Each AI Workload

Each AI workload has its own bottleneck: inference needs bandwidth, training needs BF16 throughput and memory.

Best GPU for Local LLMs and LLM Inference

The best GPU for local LLM work is the RTX PRO 6000 Blackwell: 96 GB holds 70B at 8-bit or gpt-oss-120b at 4-bit, and it generates 281.1 tokens per second on the llama.cpp scoreboard. That makes it the best GPU for LLM inference on one card. For models under 32 GB, the RTX 5090 is the fastest consumer option at 300.4 tokens per second.

Best GPU for AI Training and Deep Learning

On a desk, the RTX PRO 6000 Blackwell leads with 503.8 dense BF16 TFLOPS and 96 GB for QLoRA. For LLM training at scale, the best GPU for deep learning is a B200 or B300 server: in MLPerf Training v6.0, 512 GB300 GPUs fine-tuned Llama 2 70B with LoRA in 0.4 minutes. For small vision models, the best GPU for machine learning on a budget is the RTX 5070 Ti.

Best GPU for AI Image and Video Generation

Image generation needs less memory: MLPerf Client v2.0, which includes an image-generation test, lists 8 GB as the minimum for NVIDIA RTX GPUs. The best GPU for Stable Diffusion and video here is the RTX PRO 6000 Blackwell, whose 96 GB and 503.8 BF16 TFLOPS leave room for large video models; the RTX 5090 is the consumer choice, and for AI image generation on a budget, the RTX 5070 Ti keeps FP4 and is available as a dedicated server in the Netherlands.

GPU Prices in 2026: Launch Price vs What You Actually Pay

Most AI GPUs cost well above launch: the RTX 5090 launched at $1,999 and its lowest US retail listing is $4,799.99, 2.4× more; the RTX 4090 sells at 2.7× and the RTX 5070 Ti at 1.6×. Retail prices are the lowest new-unit US listings, checked October 15, 2026.

Memory drives AI hardware prices across the GPU market. Gartner forecast in April that DRAM prices would rise 125% this year, TrendForce reported that GDDR7 demand comes mainly from AI chips, and Micron expects tighter DRAM supply in 2027 and 2028. Per GB of VRAM, Ryzen AI Max+ 395 systems ($30) cost least and the RTX 4090 ($183) most.

Buy or Rent a GPU for AI? What the Card Price Leaves Out

Renting a dedicated GPU server is the faster, lower-risk route for most AI projects in 2026: retail cards cost up to 2.7× their launch price, the lowest US listing for the RTX 5090 is out of stock, NVIDIA’s store is out of the RTX PRO 6000 Blackwell, and the card is only part of the bill.

A purchased card needs a host built around it:

  • Power and cooling: the RTX PRO 6000 Blackwell draws up to 600 W, about 432 kWh a month under constant load (est.), and NVIDIA specifies a 1000 W power supply for the RTX 5090.
  • The rest of the server: a 96 GB card pairs with a server-class CPU, 256 GB of RAM and NVMe storage, bought in a year when Gartner expects DRAM prices to rise 125%.
  • Time: sourcing, assembly, driver and CUDA setup come before the first training run.

Our dedicated GPU servers cover all of this for a fixed monthly price. One customer gets the whole card, with no vGPU, MIG or time-sharing, plus root and IPMI access, a custom ISO, CUDA installed on request, NVMe storage, unmetered traffic and DDoS protection. Servers are ready in 1 to 4 hours in the Netherlands, Finland and Germany, multi-GPU servers come on request in 3 to 14 days, engineers answer 24/7, and you can pay with BTC, ETH, USDT or a card after signing up with an email.

Plan GPU VRAM CPU RAM Storage Location
WG-1 RTX 2080 Ti 11 GB Ryzen 9 3900X (12 cores / 24 threads) 64 GB 2 × 500 GB NVMe Netherlands
WG-2 RTX 5070 Ti 16 GB Ryzen 9 9900X (12 cores / 24 threads) 64 GB 2 × 960 GB NVMe Netherlands
GEX131-1 RTX PRO 6000 Blackwell 96 GB Xeon Gold 5412U (24 cores / 48 threads) 256 GB 2 × 960 GB NVMe Finland or Germany

WG-1 costs $340/month billed annually or $400 month-to-month, WG-2 $680 or $800, and GEX131-1 $3,230 or $3,800; 3-month and 6-month terms take 5% and 10% off. Rent matches cost to the project: a fine-tuning run or a model evaluation can end in weeks, and the server ends with it.

FAQ

What Is the Most Powerful GPU for AI Right Now?

The NVIDIA B300 is the most powerful option you can deploy today, with 288 GB of HBM3e and 8.00 TB/s, sold only in servers. On a desktop, the most powerful card is the RTX PRO 6000 Blackwell, with 96 GB and 503.8 dense BF16 TFLOPS. NVIDIA’s next data center GPU, Rubin, has 288 GB of HBM4 at 22 TB/s.

What Is the Best GPU for Learning AI?

The NVIDIA GeForce RTX 5060 Ti 16 GB is the cheapest card to start with: a $429 launch price ($789.99 retail), FP4 tensor cores and the same CUDA stack used on data center GPUs. Its 16 GB runs 7B and 13B models at 4-bit (4.2 and 7.8 GB est.) and 7B at 8-bit (8.4 GB est.).

Is 16 GB of VRAM Enough for AI?

For models up to 13B, yes: 16 GB holds a 13B model at 8-bit (15.6 GB est.) or at 4-bit (7.8 GB est.) with room for longer context, and it meets the 8 GB minimum for image generation. A 32B model at 4-bit needs 19.2 GB (est.), so it calls for 24 GB or more, and a 70B model at 4-bit needs about 42 GB (est.).